Complete Kit for Electric Fence Electric Fence Electrifier Gemi Elettronica

Description

Complete kit with double wire for electric fence
Electric Fence Electricity Grid
The complete kit for Gemi Elettronica electric fence allows you to choose the suitable products for the electric fence according to your needs.
Below you will find a brief description to help you in the right choice for each product.
What is an electric fence kit made of?
1) Energisers
2) Insulators
3) Electric Fence Conductors
______________________________________________________________________
Energisers
The first product of your electric fence kit to choose from is the electrificator.
Energizers are divided into two categories based on power supply:
Don't have electricity near the fence?
Buy one of the 3 battery models produced by Gemi Elettronica
3) B12 extra strong (12 V) - 5 KM
Energisers B / 12 Extra Strong A 12 V Battery
Construction of an electric fence, electrified fence powered by 12V battery with a maximum length of 5 km
Nb:
The car battery is not included in this kit
(sold separately)
Here's how it works:
1) Connect the energiser via the terminals to a 12V battery (a 12V - 40Ah car battery is recommended.)
2) Connect the yellow / green wire to earth.
3) Connect the red wire to the electric wire of the fence.
TECHNICAL FEATURES:
- Voltage: 10000 V
- Absorption: 300 mA
- Power: 5 J
- Pulses per minute: 50
- Weight: 1.15 kg
- Dimensions: 24cm x 25cm x 16.5cm
- iP X4
- Appliance complies with CE regulations
- Built according to the references of the EN 60335-2-76 / Al1 standard
- Warranty: 3 Years
4) COMPLETE KIT B12 + 2 12 V
BATTERIES
Energisers B / 12 extra strong + 2 12 V rechargeable batteries
The kit consists of:
1) B / 12 extra strong energisers
2) N. 2 12 V batteries with practical carrying case included
(The presence of the two accumulators / batteries allows to have a continuous autonomy of the electrificator.
While one battery powers the appliance, the other is charged by its charger.
The batteries have an autonomy of 48 hours each.)
operation
1) Connect the energiser to the 12V battery via the terminals.
2) Connect the yellow / green wire to earth.
3) Connect the red wire to the electric wire of the fence.
Remember to recharge the second battery while the first is feeding the fence.
5) B12 EXTRA-STRONG + SOLAR PANEL
The kit consists of:
1) B / 12 extra strong energisers
2) Solar panel
(Equipped with charge controller and terminals for solar panel connection and 12V battery)
NB: the 12V battery is NOT included in the kit
(12V - 40ah car battery recommended)
operation
1) Connect the energiser to the 12V battery via the terminals.
2) Connect the yellow / green wire to earth.
3) Connect the red wire to the electric wire of the fence.
4) Connect the energiser to the solar panel (using the specific power cable included in the kit)
Why choose an electric fence with solar panel?
Thanks to the possibility of dual 12V power supply and Solar Panel you will always have autonomy for your fence.
Even on days with little solar energy.
____________________________________________________________________________________________
Electric Fence Conductors
Which wire to choose for your fence?
Inside the complete kits we give the possibility to choose between two wires for electric fence of different thickness:
1)
4 Poly Wire - Thickness 2,2 mm²
(Medium-high resistance and medium-high conductive power. Recommended for medium-sized animals)
Conductors: 4 wires for excellent conductivity - UV resistant
Resistivity: 0.5 ohm / h - leakage current
Tensile strength 50 kg
2)
6 Poly Wire - Thickness 4 mm²
(
Medium-high resistance and medium-high conductive power. Recommended for medium-sized animals)
Conductors: 6 wires for excellent conductivity - UV resistant
Resistivity: 0.3 ohm / h - leakage current
Tensile strength 70 kg
3)
8 Poly Wire - Thickness 6 mm²
(Very high resistance and very high conductive power. Recommended for large animals and the most recommended against wild boars)
Conductors: 8 wires for excellent conductivity - UV resistant
Resistivity: 0.15 ohm / h - leakage current
Tensile strength: 100 kg
How many meters of electric wire for the fence do you recommend?
Ex: Do you have to fence an area of 500 linear meters?
You will need at least 1000 meters of wire
(we recommend at least a double wire arranged at 2 different heights of the fence)
If you think you need to protect your fence from different types of animals (small, medium and large), you could also consider a triple-wire fence (arranged at three different heights).
So in that case you should multiply the number of linear meters by the number of wires (in this case 3), arranged at different heights, and therefore you would need at least 1500 meters.
For further doubts, do not hesitate to contact us in chat.
_____________________________________________________________________________
Insulators
To conclude the kit for the fence, you must select the type of insulators for the electric fence. Choosing according to the material of the poles used for your fence (insulators for wooden poles or for iron poles)
How many insulators do you recommend?
We recommend mounting a pole every 4/5 meters and, depending on the number of wires placed on each pole, 2/3 insulators per pole.
So if your fence is 500 linear meters:
500/5 = 100 Poles x 2 insulators = 200 Insulators (minimum)
Insulators For Iron Posts
Super resistant and very easy to assemble.
Supported iron pole diameter: da
1 mm a 18 mm
.
Suitable for all types of polywire wires, wires and tapes (
up to 30 mm
)
100% Made in Italy product
- The highest quality in the world at the lowest price on the web. The best in its category:
SEEING IS BELIEVING
!
Larger dimensions that confer greater resistance of the insulator and greater insulating power to the fence
(keeping its electric charge constant even after several km)
They can be mounted in two ways (
one of a kind
)
, according to the requirements. The second way, allows you to lengthen the distance between the iron pole and the wire contained in the insulator and this allows the fence to maintain a greater electrical charge.
Insulators For Wooden Posts
Super resistant and very easy to assemble.
Equipped with internal screw (easy to screw on wooden poles) and yellow ring, resistant to
UV rays
Suitable for all types of wires, threads and ribbons of metal wires on the market (
up to 30 mm
)
-
100% Made in Italy product
Patented by Gemi Elettronica, the highest quality in the world, at the lowest price on the web The best in its category:
SEEING IS BELIEVING
ANNOUNCEMENTS
: Larger dimensions that confer greater resistance of the insulator and greater insulating power to the fence (keeping its electric charge constant even after several km)
_______________________________________________
Do you need to compose quantities other than the kit?
If you need to compose different quantities you can individually select the products and quantities for each product, you will find everything you need for your electric fence